Buying Guide

The Best Mini PC Mounts Under $50: Picks and Trade-offs

We looked at 4 mini PC mounts under $50 side by side, with the trade-offs that separate them and who each one suits.

By Jamie Cole, Lead Product Researcher

7 min read4 products evaluated

We may earn a commission from purchases made through links in this guide. Learn more.

Under $50, mounts reach their most heavy-duty form for this product category, with full 360-degree swivel arms, adjustable frames wide enough for larger PC cases, and weight ratings well above what a typical mini PC alone requires.

We compared this lineup on swivel range, adjustable frame dimensions, and stated weight capacity, since these features specifically matter if you're mounting a larger small form factor case rather than an ultra-compact thin client.

Quick Picks

Our 4 recommendations at a glance. Tap a pick for the full verdict.

  1. Best Overall

    Mount-It! CPU Under Desk Mount Bracket, 360 Degree Swivel

    Buyers who want full swivel access to rear cables without unmounting the device

    Our take Check price for Mount-It! CPU Under Desk Mount Bracket, 360 Degree Swivel (opens in a new tab)

  2. Best Value 2-Pack

    suptek Thin Client Mount Bracket, 2 Pack

    Buyers outfitting two workstations who don't need swivel or the largest size range

    Our take Check price for suptek Thin Client Mount Bracket, 2 Pack (opens in a new tab)

  3. Best 135-Degree Swivel Value

    VIVO Black Under Desk and Wall Office PC Mount

    Buyers who want solid swivel access and heavy-duty capacity without the top price

    Our take Check price for VIVO Black Under Desk and Wall Office PC Mount (opens in a new tab)

  4. Best for Confirmed Dell OptiPlex Fit

    HumanCentric Mount for Dell OptiPlex Micro

    Buyers with a genuine Dell OptiPlex Micro who want the most precisely matched fit

    Our take Check price for HumanCentric Mount for Dell OptiPlex Micro (opens in a new tab)

Our Picks

Mount-It! CPU Under Desk Mount Bracket, 360 Degree Swivel

Best Overall1 of 4

Mount-It! CPU Under Desk Mount Bracket, 360 Degree Swivel on Amazon (opens in a new tab)

This bracket's full 360-degree swivel is a genuine functional upgrade over the fixed or partial-rotation mounts at lower price tiers, letting you spin the entire mounted unit to access rear cables and ports without unmounting anything.

Best for

Buyers who want full swivel access to rear cables without unmounting the device

Why we like it

5 to 8 inches wide, a considerably larger range than the thin-client-focused brackets built purely for compact mini PCs.

Built from high-strength steel rated to hold up to 22 lbs, it clamps tightly on both the top and bottom of the mounted unit, and sticky EVA pads protect both the device and the mount itself from scratches during that clamping process.

Best for buyers who want full swivel access to rear ports and cables without unmounting the device.

Key dimensions & specs

  • 360-degree swivel, fits 11.8-21 in height, 3.5-8 in width
  • Supports up to 22 lbs, high-strength steel
  • Wall or under-desk installation, EVA scratch pads

Pros

  • Full 360-degree swivel for rear cable and port access
  • Widest device size range in this comparison
  • Top-and-bottom clamping keeps the unit secure

Cons

  • Priciest pick in this comparison
  • Larger footprint needed to accommodate its bigger size range
suptek Thin Client Mount Bracket, 2 Pack

Best Value 2-Pack2 of 4

suptek Thin Client Mount Bracket, 2 Pack on Amazon (opens in a new tab)

At under $38 for two complete mounting brackets, this remains the strongest per-unit value in this comparison for anyone needing more than one mount, working out to roughly $19 each.

Best for

Buyers outfitting two workstations who don't need swivel or the largest size range

Why we like it

7 inches in width, supports up to 11 lbs, and offers three mounting options: monitor pole clip, VESA, or under desk.

Its rust-proof coating and rubber-padded shoulder straps protect mounted devices long-term, and 24/7 technical support backs the purchase despite its lower per-unit cost compared to the premium swivel pick above.

Best for buyers outfitting two separate mini PC workstations who don't need full swivel or the largest size range.

Key dimensions & specs

  • 2 complete brackets, 0.6-2.7 in width each
  • Supports up to 11 lbs per bracket, rust-proof coating
  • 3 mounting options: pole clip, VESA, or under desk

Pros

  • Two complete mounts at the lowest combined per-unit cost
  • Rust-proof coating protects against long-term corrosion
  • 24/7 technical support included

Cons

  • No swivel function like the Mount-It! pick above
  • Lower weight capacity than the heavy-duty picks in this tier
VIVO Black Under Desk and Wall Office PC Mount

Best 135-Degree Swivel Value3 of 4

VIVO Black Under Desk and Wall Office PC Mount on Amazon (opens in a new tab)

This mount offers a smooth 135-degree swivel, less than the Mount-It!

Best for

Buyers who want solid swivel access and heavy-duty capacity without the top price

Why we like it

Pick's full 360 degrees but still enough for easy backside port and cable access without the largest possible price tag. 5 inches in height, fitting most PC cases on the market including many mini and small form factor towers.

It requires your desktop to have an overhang, the distance from desk frame supports to the outer edge, greater than or equal to your PC's width, a specific installation requirement worth checking against your actual desk before buying. Rated to support up to 22 lbs, it matches the heavier-duty weight capacity of the pricier swivel pick.

Best for buyers who want solid swivel access and heavy-duty weight capacity at a lower price than the full 360-degree pick.

Key dimensions & specs

  • 135-degree swivel, fits 3.5-7.8 in width, 11.5-20.5 in height
  • Supports up to 22 lbs, solid steel construction
  • Requires adequate desk overhang for installation

Pros

  • 135-degree swivel at a lower price than full 360-degree mounts
  • Matches the 22 lb capacity of pricier heavy-duty picks
  • Padded interior protects the mounted case from scratches

Cons

  • Less rotation range than the full 360-degree Mount-It! pick
  • Requires specific desk overhang clearance to install properly
HumanCentric Mount for Dell OptiPlex Micro

Best for Confirmed Dell OptiPlex Fit4 of 4

HumanCentric Mount for Dell OptiPlex Micro on Amazon (opens in a new tab)

For buyers with a tiny Dell OptiPlex Micro form factor mini PC rather than a larger PC case, this mount remains the most precisely matched option in this comparison, listing extensive specific model numbers and cross-referenced Dell part numbers for confident procurement or personal purchase decisions.

Best for

Buyers with a genuine Dell OptiPlex Micro who want the most precisely matched fit

Why we like it

It supports VESA behind a monitor, wall mounting, or under-desk installation using one consistent hardware kit.

2 inch dimensions rather than a full-size PC tower.

Best for buyers with a tiny Dell OptiPlex Micro who don't need swivel or heavy-duty capacity built for larger cases.

Key dimensions & specs

  • Fits Dell OptiPlex Micro MFF form factor specifically
  • 75x75mm and 100x100mm VESA, 3 mounting options
  • Velcro straps for power adapter management

Pros

  • Most precisely matched fit for genuine OptiPlex Micro units
  • Cross-referenced Dell part numbers aid procurement confidence
  • Consistent power adapter management across mount types

Cons

  • No swivel function, unlike the two picks above
  • Not sized for larger PC cases the swivel mounts accommodate

How We Chose These Mini PC Mounts Under $50

Each pick was assessed across 5 criteria weighted for real-world use.

Compared rotation range, from no swivel through 135-degree and full 360-degree designs.
Compared the width and height range each mount's adjustable frame can accommodate.
Compared stated maximum supported weight across the heavier-duty picks in this tier.
Compared per-unit cost for the listing offering two mounts in a single purchase.
Checked specific desk clearance or overhang requirements each mount depends on for proper installation.

What to Look for in a Mini PC Mount Under $50

Key buying criteria so you get the right fit the first time.

  1. Swivel Range Should Match How Often You Actually Need Rear Access, Not Just Sound Impressive

    A full 360-degree swivel like the Mount-It! Pick offers genuine convenience if you regularly swap cables, add peripherals, or troubleshoot rear ports, but if your setup is configured once and rarely touched afterward, a 135-degree swivel or even a fixed mount accomplishes the same end result without the price premium. Consider your actual usage pattern honestly, since paying extra for rotation range you'll use once during initial setup and never again is a real, avoidable overspend. Match the swivel range to your realistic frequency of rear-access needs, not to the maximum available specification.

  2. Desk Overhang Requirements Are a Real Installation Constraint Some Buyers Overlook

    The VIVO pick specifically requires your desk to have an overhang, meaning the distance from the desk's frame supports to its outer edge, greater than or equal to your PC's width, a genuine physical constraint that can prevent installation entirely on desks with supports positioned close to the edge. This isn't a universal requirement across every mount, but where it applies, failing to check it before buying can mean discovering the mount simply won't fit your specific desk after the fact. Measure your desk's actual overhang before purchasing any mount with this stated installation requirement.

  3. A Larger Adjustable Frame Range Accommodates Devices a Thin-Client-Focused Mount Cannot

    And VIVO picks both adjust to fit PC cases up to roughly 20-21 inches tall, a size range that includes many small form factor towers beyond the ultra-compact thin clients and Mac Minis that dedicated mini PC mounts target. If your device is closer to a compact tower than a true thin client, verify the adjustable frame's actual maximum dimensions rather than assuming any mount labeled for mini PCs will physically accommodate a larger case. Measure your specific device's height and width against a listing's stated adjustable range before assuming compatibility.

  4. Weight Capacity at This Tier Reflects Genuine Heavy-Duty Engineering, Not Just a Marketing Number

    And VIVO picks are rated to support up to 22 lbs using top-and-bottom clamping or a solid steel adjustable frame, meaningfully more robust construction than the lighter single-point mounting used by mounts rated around 11 lbs. This higher capacity matters specifically if your mounted device is a larger PC case rather than an ultra-lightweight mini PC, since actual case weight varies considerably across the small form factor category. Check both the stated weight capacity and how the mount physically secures the device, since a stated number alone doesn't guarantee the clamping mechanism suits your specific case shape.

  5. A Multi-Pack Purchase at This Tier Still Only Pays Off If You Need Multiple Standard Mounts

    The suptek 2-pack remains a strong per-unit value at this price tier specifically for buyers needing two standard-capacity mounts, but it doesn't offer the heavy-duty swivel or larger frame size the Mount-It! And VIVO picks provide, since it's built around the same 11 lb thin client specifications as suptek's single-unit version. If your actual need is one heavier-duty mount rather than two standard ones, the 2-pack's value proposition doesn't apply to your situation regardless of its favorable per-unit pricing. Match the pack's actual capabilities, not just its price-per-unit math, to your real requirement before choosing it over a single heavy-duty mount.

How to Choose a Mini PC Mount Under $50

Full 360-degree rear access without unmountingCPU Under Desk Mount Bracket, 360 Degree Swivel
Two mounts at the best combined valueSuptek Thin Client Mount Bracket, 2 Pack
Solid swivel and heavy-duty capacity at a lower priceVIVO Black Under Desk and Wall Office PC Mount
A precisely matched fit for a genuine OptiPlex MicroHumanCentric Mount for Dell OptiPlex Micro

360-Degree Swivel vs 135-Degree Swivel

Full rotation reaches any angle for rear port access, worth the price premium if you frequently swap cables or peripherals.
Still provides easy backside access for most cable and port needs, at a lower price than the full-rotation pick.

If you rarely need to reach rear ports after initial setup, the VIVO's 135-degree swivel and lower price make more sense than paying for full rotation you'll use infrequently.

Tiny OptiPlex Micro or thin clientHumanCentric Dell OptiPlex Mount or suptek 2 Pack
Larger small form factor PC case360 Swivel or VIVO Black Mount

For a Frequently Reconfigured Workstation Specifically

Full swivel range so you can access rear ports and cables repeatedly without unmounting the device each time.
Pick's full 360-degree swivel suits a workstation where cables or peripherals change often.

You need full 360-degree rotation and the widest device size range, where the Mount-It! Pick delivers both at the top of this tier's price range.
You have a compact OptiPlex Micro or just need two standard mounts, where the HumanCentric or suptek picks cover that need for about $11 less.

Frequently Asked Questions

How do I know if my desk has enough overhang for the VIVO mount's installation requirement?

Measure the distance from your desk's frame supports (the legs or braces underneath) to the desk's outer edge, and confirm that distance is greater than or equal to your PC case's width before purchasing.

What's the most common mistake buyers make when choosing between 360-degree and 135-degree swivel mounts?

Paying extra for full 360-degree rotation without considering how often they'll actually need to access rear ports after initial setup, when a 135-degree swivel or even a fixed mount often serves the same practical purpose for a rarely-reconfigured workstation.

360-degree swivel mount worth it over the VIVO 135-degree pick?

If you frequently swap cables or peripherals and need to reach any angle behind the device, yes, but if occasional rear access is enough, the VIVO's 135-degree swivel accomplishes that at roughly $11 less.

Can the heavy-duty 22 lb capacity mounts in this comparison also work for a lightweight thin client?

And VIVO picks can mount a lighter device just fine, though you'd be paying for weight capacity headroom you won't use if your actual device is a lightweight thin client rather than a larger PC case.

Does the suptek 2-pack offer the same swivel functionality as the Mount-It!

No, the suptek 2-pack brackets don't include a swivel mechanism, so if rear rotation access matters to you, choose the Mount-It! Or VIVO pick instead, even if it means paying more per mount.

How do I choose between the HumanCentric Dell OptiPlex Mount and a universal heavy-duty mount at this price?

If you have a compact OptiPlex Micro form factor device, the HumanCentric mount's precisely matched fit and documented part-number compatibility are worth choosing over a universal heavy-duty mount sized for larger cases you don't actually own.

Bottom Line

Best overall: Mount-It! CPU Under Desk Mount Bracket, 360 Degree Swivel — best overall pick in this roundup. See the full verdicts above for every pick, with pros, cons and who each one suits.

Browse all mini pc mounts under $50 on Amazon — Prime-eligible options with current pricing.