Buying Guide
The Best Mini PC Mounts for a Cleaner, More Useful Desk
We looked at 8 mini PC mounts side by side, with the trade-offs that separate them and who each one suits.
By Jamie Cole, Lead Product Researcher
9 min read8 products evaluated
We may earn a commission from purchases made through links in this guide. Learn more.
A Mini PC mount only earns its keep if it solves the problem it was bought for: getting a small computer off the desk without blocking its vents, overloading the surface it attaches to, or making the ports impossible to reach. Before comparing individual products, it helps to separate mounting method from mounting hardware, because a mount rated for under-desk use is not automatically a good wall mount, and a VESA-only bracket cannot substitute for a stud-anchored wall plate.
This guide covers the full mounting category: behind-monitor, under-desk, and wall-mounted options side by side. If you already know you want VESA-specific hardware or a wall-only setup, our narrower guides on VESA mounts and wall mounts dig deeper into those two methods specifically, while this guide is the place to start if you are still deciding which mounting location fits your desk.
Quick Picks
Our 8 recommendations at a glance. Tap a pick for the full verdict.
Best Overall Pick
Adjustable Thin Client Mini PC Mount Bracket (Wall, Under Desk, Monitor Arm)
Buyers who have not yet decided between wall, under-desk, or behind-monitor and want one mount that can do any of the three.
Our take Check price for Adjustable Thin Client Mini PC Mount Bracket (Wall, Under Desk, Monitor Arm) (opens in a new tab)
Best for Heavier Combined Loads
HumanCentric Thin Client Mount Bracket Mini PC VESA Monitor Arm, Under Desk
Buyers piggybacking a Mini PC on an existing monitor's VESA point who need a mount that actually publishes a combined weight figure.
Our take Check price for HumanCentric Thin Client Mount Bracket Mini PC VESA Monitor Arm, Under Desk (opens in a new tab)
Best Warranty
VIVO Adjustable Thin Client Mini PC Mount Bracket
Buyers who want a dependable, average-capacity mount backed by a longer warranty than most competitors offer.
Our take Check price for VIVO Adjustable Thin Client Mini PC Mount Bracket (opens in a new tab)
Best for Open-Frame Airflow
suptek Thin Client Mount Bracket Adjustable Mini PC Mount
Buyers whose main worry is trapped heat behind a monitor and want a mount built around keeping air moving.
Our take Check price for suptek Thin Client Mount Bracket Adjustable Mini PC Mount (opens in a new tab)
Best Budget Wall or VESA Pick
Monzlteck Adjustable Small Device Wall Mount or VESA Mount Behind the Monitor
Budget-focused buyers who want a straightforward wall or under-desk mount without extra features they will not use.
Our take Check price for Monzlteck Adjustable Small Device Wall Mount or VESA Mount Behind the Monitor (opens in a new tab)
Best Under-Desk Height Adjustment
Under Desk Mini PC Mount Bracket, 5-Level Height Adjustable
Buyers who have already decided on under-desk mounting and want fine-grained height control for airflow and reach.
Our take Check price for Under Desk Mini PC Mount Bracket, 5-Level Height Adjustable (opens in a new tab)
Best Budget Under-Desk Pick
bylitco Under Desk Laptop/Mini PC Storage Mount
Buyers on a tight budget who know their exact Mini PC's dimensions and want a simple fixed under-desk tray.
Our take Check price for bylitco Under Desk Laptop/Mini PC Storage Mount (opens in a new tab)
Best Heavy-Duty Under-Desk Pick
PUTORSEN Under Desk Mini PC Mount NAS Mount Bracket Holder
Buyers mounting a Mini PC alongside a NAS or heavier accessory who need real headroom above the typical 11 lb bracket rating.
Our take Check price for PUTORSEN Under Desk Mini PC Mount NAS Mount Bracket Holder (opens in a new tab)
Our Picks
Best Overall Pick1 of 8
Adjustable Thin Client Mini PC Mount Bracket (Wall, Under Desk, Monitor Arm) on Amazon (opens in a new tab)
This bracket covers all three mounting locations in one product: wall, under desk, or behind the monitor via VESA or a monitor arm.
Best for
- Buyers who have not yet decided between wall, under-desk, or behind-monitor and want one mount that can do any of the three.
Why we like it
8 inches and supports up to 12 pounds, which covers the vast majority of NUC-style, Mac mini, and thin client Mini PCs.
Covers three different mounting locations. On price, it comes in below HumanCentric Thin Client Mount Bracket Mini PC VESA Monitor Arm, which is worth weighing if cost is your deciding factor between the two.
On the other side, No documented long-term vibration test for the monitor arm mounting mode.
Key dimensions & specs
- Metal construction
- Fits 0.63" to 2.8" device width
- Wall, under-desk, behind-monitor, and monitor arm mounting
- 12 lb weight capacity
- Built-in cable management and pen holder
Pros
- covers three different mounting locations
- 12 lb capacity fits nearly all Mini PCs
- Cable management keeps the mounted PC's wiring tidy
- Open design avoids covering vents or ports
Cons
- 12 lb limit still needs checking against your specific Mini PC and any attached dock
- Wall mounting hardware is generic, not stud-specific
- No documented long-term vibration test for the monitor arm mounting mode
Best for Heavier Combined Loads2 of 8
HumanCentric Thin Client Mount Bracket Mini PC VESA Monitor Arm, Under Desk on Amazon (opens in a new tab)
55 inches deep and rates the mount itself for up to 11 pounds of Mini PC weight, or 18 pounds combined if a monitor is also riding on the same VESA point.
Best for
- Buyers piggybacking a Mini PC on an existing monitor's VESA point who need a mount that actually publishes a combined weight figure.
Why we like it
That combined figure matters more than most listings admit, since a Mini PC piggybacking on a monitor's own VESA mount adds its weight to whatever that monitor arm already carries.
On the other side, Side-mounted power button requirement excludes some NUC models.
Key dimensions & specs
- Fits 0.65" to 2.55" device depth
- VESA 75x75 and 100x100mm
- Wall, under-desk, and pole mounting
- 11 lb device rating, 18 lb combined with monitor
- Silicone scratch strips included
Pros
- Publishes a combined weight rating, not just a device-only number
- Fits three mounting locations with one hardware kit
- Silicone strips protect the device from scratches
- No-questions-asked support policy stated in the listing
Cons
- Higher price than several similar mounts here
- Combined 18 lb rating still requires checking your monitor arm's own limit separately
- Side-mounted power button requirement excludes some NUC models
Best Warranty3 of 8
VIVO Adjustable Thin Client Mini PC Mount Bracket on Amazon (opens in a new tab)
1 centimeters of width and is rated for up to 5 kilograms, or about 11 pounds, on solid steel construction with a powder coated rust-resistant finish.
Best for
- Buyers who want a dependable, average-capacity mount backed by a longer warranty than most competitors offer.
Why we like it
It covers the same three mounting locations as the pricier options here: behind the monitor, clamped to a monitor arm pole, or installed under the desk.
On the other side, No cable management feature built in.
Key dimensions & specs
- Solid steel, powder coated finish
- 1.8cm to 7.1cm adjustable width
- VESA 75x75 and 100x100mm
- 5kg (about 11 lb) weight capacity
- 3-year manufacturer warranty
Pros
- 3-year warranty is longer than most comparable mounts
- Open-frame design keeps vents and ports accessible
- Steel build with rust-resistant coating
- Fits a wide range of thin clients and Mini PC brands
Cons
- 11 lb capacity is average for the category, not class-leading
- Pole clamp diameter range (3 to 4.1cm) will not fit every monitor arm pole
- No cable management feature built in
Best for Open-Frame Airflow4 of 8
suptek Thin Client Mount Bracket Adjustable Mini PC Mount on Amazon (opens in a new tab)
7 inches of width and is built from solid steel rated to support up to 11 pounds, with a rust-proof coating and adjustable shoulder straps to keep the device from sliding once mounted.
Best for
- Buyers whose main worry is trapped heat behind a monitor and want a mount built around keeping air moving.
Why we like it
The listing specifically calls out an open-frame design meant to reduce thermal throttling by letting air pass through the mounted device rather than trapping it against a solid backing plate.
The real tradeoff against that pick: Same 11 lb ceiling as several other mounts here, not a heavy-duty option.
On the other side, Strap-based retention needs periodic tightness checks over time.
Key dimensions & specs
- Solid steel construction
- 0.6" to 2.7" adjustable width
- VESA 75x75 and 100x100mm
- 11 lb weight capacity
- Open-frame cooling design
Pros
- Explicitly designed around airflow, not just device holding
- 11 lb capacity covers most Mini PCs
- Rubber pads prevent scratching during mounting
- 24/7 support stated in the listing
Cons
- Same 11 lb ceiling as several other mounts here, not a heavy-duty option
- Open-frame design offers less physical protection than an enclosed bracket
- Strap-based retention needs periodic tightness checks over time
Best Budget Wall or VESA Pick5 of 8
Monzlteck Adjustable Small Device Wall Mount or VESA Mount Behind the Monitor on Amazon (opens in a new tab)
8 inches thick, built from steel with anti-scratch EVA pads inside the bracket.
Best for
- Budget-focused buyers who want a straightforward wall or under-desk mount without extra features they will not use.
Why we like it
75 inches thick to anchor securely.
On the other side, No stated weight capacity figure in the listing, unusual for this category.
Key dimensions & specs
- High-quality steel construction
- Fits devices under 2.8" thick
- Wall or under-desk mounting
- Anti-scratch EVA pads
- Includes drywall anchors and screws
Pros
- Lowest price point among the wall-capable mounts here
- Simple two-screw installation
- EVA pads protect the device from scratches
- Works on a wall, under a desk, or behind a TV
Cons
- No cable management or pen holder extras
- Included drywall anchors are a weaker anchor point than a stud for heavier setups
- No stated weight capacity figure in the listing, unusual for this category
Best Under-Desk Height Adjustment6 of 8
Under Desk Mini PC Mount Bracket, 5-Level Height Adjustable on Amazon (opens in a new tab)
Width-adjustable side brackets fit Mac mini, Intel NUC, Xbox, and other small form factor devices, and the listing notes the range is meant to optimize both airflow clearance and how easily you can reach the ports.
Best for
- Buyers who have already decided on under-desk mounting and want fine-grained height control for airflow and reach.
Why we like it
3", too shallow for some thicker Mini PC and dock combos.
Key dimensions & specs
- Reinforced steel frame
- 5-level height adjustment, 1.8" to 3.3"
- Width-adjustable side brackets
- Under-desk mounting only
- Includes screws and positioning template
Pros
- 5 height levels give real flexibility for airflow and port access
- Reinforced steel avoids sagging under sustained load
- Positioning template speeds up installation
- Fits a wide range of small form factor devices
Cons
- Under-desk only, no wall or behind-monitor option
- No stated maximum weight capacity in the listing
- Height range tops out at 3.3", too shallow for some thicker Mini PC and dock combos
Best Budget Under-Desk Pick7 of 8
bylitco Under Desk Laptop/Mini PC Storage Mount on Amazon (opens in a new tab)
85 inches thick with soft padding to prevent scratches.
Best for
- Buyers on a tight budget who know their exact Mini PC's dimensions and want a simple fixed under-desk tray.
Why we like it
78 inches thick, and a mounting template is included to speed up drilling.
The real tradeoff against that pick: No height or width adjustment.
On the other side, No stated weight capacity.
Key dimensions & specs
- Under-desk mounting only
- Fits devices under 1.85" thick
- Soft interior padding
- 6-screw installation
- Mounting template included
Pros
- Lowest price in this guide
- Simple, fixed design with no adjustment to fuss with
- Soft padding protects the device
- Mounting template makes drilling straightforward
Cons
- No height or width adjustment
- 1.85" thickness limit is the tightest in this guide
- No stated weight capacity
Best Heavy-Duty Under-Desk Pick8 of 8
PUTORSEN Under Desk Mini PC Mount NAS Mount Bracket Holder on Amazon (opens in a new tab)
This under-desk mount is rated to hold up to 22 pounds, well above the 11 to 12 pound ceiling of most brackets in this guide, which makes it a better fit for a Mini PC paired with a NAS enclosure or a heavier dock.
Best for
- Buyers mounting a Mini PC alongside a NAS or heavier accessory who need real headroom above the typical 11 lb bracket rating.
Why we like it
2 to 8 inches, a wider range than most competitors, for both airflow and easy port access.
On the other side, Extra load capacity is unnecessary weight allowance for a bare, lightweight Mini PC.
Key dimensions & specs
- Sturdy steel construction
- 22 lb (10kg) weight capacity
- 9-level height adjustment, 4.2" to 8.0"
- Under-desk mounting only
- Complete installation kit included
Pros
- 22 lb capacity is the highest in this guide
- 9 height levels is more range than most competitors
- Good fit for NAS or dock combinations, not just a bare Mini PC
- Complete kit with positioning template included
Cons
- Under-desk only, no wall or VESA option
- Highest price point in this guide
- Extra load capacity is unnecessary weight allowance for a bare, lightweight Mini PC
How We Chose These Mini PC Mounts
Each pick was assessed across 5 criteria weighted for real-world use.
- We compared whether each mount supports the mounting locations it claims (behind-monitor, under-desk, wall) rather than listing every location a generic bracket happens to bolt onto.
- We compared each mount's stated weight rating against typical Mini PC weights, and flagged listings that publish a combined device-plus-monitor figure versus those that only rate the bare device.
- We looked at whether the mount's design, open-frame versus solid backing, keeps a mounted Mini PC's intake and exhaust clear rather than trapping heat against a plate.
- We compared whether ports stay reachable once the device is mounted, since a Mini PC tucked under a desk or behind a monitor is only convenient if you are not fighting cable access every time you plug something in.
- We treated behind-monitor, under-desk, and wall mounting as three real, different use cases rather than interchangeable marketing bullet points, and scored each mount on how well it actually serves its stated location.
What to Look for in a Mini PC Mount
Key buying criteria so you get the right fit the first time.
Verify your exact mini PC model against the mount's stated compatibility list
Mini PC mounts and brackets are built around specific chassis dimensions and screw-hole patterns, and unlike a universal VESA monitor mount, many mini PC brackets are designed for one specific brand's chassis shape, such as Dell OptiPlex Micro, Lenovo ThinkCentre Tiny, HP EliteDesk Mini, or a specific generation of Mac mini.
Mounting hardware that doesn't match your exact model can fail to align with the screw holes at all, or worse, only partially secure the device, creating a real risk of it working loose over time in a mount that's supposed to hold it stationary.
Check the listing's stated compatible models and generations specifically against your own mini PC's exact model number, not just the general "mini PC" category claim in the title.
Confirm the mount's actual mounting surface (VESA, rack, wall, or under-desk) matches your install location
Mini PC mounts split into different installation categories: VESA mounts attach to the back of a monitor or TV using the standardized VESA hole pattern, rack mounts fit a 10-inch home-lab or 19-inch commercial server rack, wall mounts attach directly to drywall or a stud, and under-desk mounts clamp to the underside of a desk surface, and these are not interchangeable hardware despite all falling under the same general product category.
Buying a rack-format shelf when you actually need a VESA bracket, for instance, means the hardware simply won't attach to your intended surface at all, since the mounting mechanism itself is fundamentally different between categories.
Identify your specific installation surface first (monitor back, rack, wall, or desk underside) and filter specifically for that mount type, rather than searching generically for "mini PC mount" and assuming any result will work for your setup.
Check the stated weight capacity against your mini PC's actual weight
A mount's weight capacity, when disclosed, reflects how much load the bracket's screws, arms, and adhesive or clamping mechanism can safely hold long-term without gradually sagging, loosening, or failing outright, and mini PCs vary meaningfully in weight depending on their chassis material and internal components, from under a pound for the lightest fanless designs to several pounds for units with larger heatsinks or multiple drive bays.
Mounting a device at or near a bracket's rated limit, especially on a mount holding the device at an angle or overhead behind a monitor, leaves little margin for the natural loosening that happens over months of use, vibration, or repeated adjustment.
Weigh your specific mini PC model (check its listed weight spec) against the mount's stated capacity, and favor a mount with meaningful headroom above your device's actual weight rather than one rated right at the edge.
Consider port and cable access after the mount is installed, not just before
A mini PC's ports are typically concentrated on the rear and sometimes front panel, and once mounted, especially behind a monitor, inside a rack, or under a desk, those ports can become significantly harder to reach for routine tasks like plugging in a USB drive or checking a status light, even though the mount holds the device perfectly securely.
Some mounts are specifically designed to preserve front-panel port access after installation, while others prioritize a low-profile or flush mount that trades away easy access for a cleaner look, and this is a real day-to-day usability tradeoff that photos alone don't always make obvious.
Think through which ports you'll need to access regularly after mounting (power, a USB drive, HDMI swaps) and check whether the specific mount's design keeps those reachable, rather than only checking that it physically holds the device.
Check what installation hardware is actually included versus what you'll need to source separately
Mount listings vary in how complete their included hardware kit is, some ship with every screw, VESA adapter plate, and cable tie needed for a full installation, while others assume you already have compatible mounting screws from the mini PC's original packaging or a previous mount, which isn't always the case if you're mounting a device for the first time or switching setups.
This matters because discovering mid-installation that you're missing a specific screw size or an adapter plate means a delayed setup and a second order, an avoidable frustration.
Check the listing's stated included contents specifically, and if you no longer have your mini PC's original mounting screws, confirm the mount ships with compatible replacements rather than assuming they're included by default.
How to Choose a Mini PC Mount
| Recommended pick in this comparison | |
|---|---|
| Behind a monitor or TV (VESA) | Adjustable Thin Client Mini PC Mount Bracket |
| Server rack (10-inch or 19-inch) | Adjustable Thin Client Mini PC Mount Bracket |
| Adjustable Thin Client Mini PC Mount Bracket |
| Bylitco Under Desk Laptop/Mini PC Storage Mount | |
| Suptek Thin Client Mount Bracket Adjustable Mini PC Mount | |
| No firm budget ceiling, prioritizing brand-specific fit | PUTORSEN Under Desk Mini PC Mount NAS Mount Bracket Holder |
Brand-Specific Fit vs Universal Compatibility
- Matches one specific chassis shape exactly, generally a more secure fit for that exact model. In this comparison: Adjustable Thin Client Mini PC Mount Bracket.
- Works across several mini PC brands with adjustable hardware, more flexible if you might switch devices later. In this comparison: PUTORSEN Under Desk Mini PC Mount NAS Mount Bracket Holder.
Confirm your exact mini PC model against the listing's stated compatibility either way, since even a "universal" mount has real size limits.
None of these picks specifically advertise preserved front-port access after mounting; check each listing's product photos for where the ports land once installed if that matters to you.
For a Home Lab Rack Specifically
- Explicit confirmation of 10-inch (home-lab) versus 19-inch (commercial) rack compatibility, since these are different standards, plus whether it's full or half rack-unit width.
- Adjustable Thin Client Mini PC Mount Bracket fits this specifically: covers three different mounting locations.
- You want what PUTORSEN Under Desk Mini PC Mount NAS Mount Bracket Holder offers: 22 lb capacity is the highest in this guide. That's a real functional upgrade over the budget picks here, not just a brand markup.
- Bylitco Under Desk Laptop/Mini PC Storage Mount already covers the essentials: Lowest price in this guide. The main thing you'd be paying extra for elsewhere in this list is broader compatibility you may not need.
Frequently Asked Questions
Can any of these mounts go on a wall, under a desk, and behind a monitor?
A few, like the HumanCentric and VIVO brackets and the Adjustable Thin Client mount from this guide, support all three locations with one hardware kit. Others, like the PUTORSEN and 5-Level Height Adjustable brackets, are under-desk only despite being in the same general category.
Is a drywall anchor strong enough for a wall-mounted Mini PC?
It can hold a very light device for light use, but a stud is the more reliable anchor point for anything left mounted long-term, since drywall anchors are more prone to slow pull-out failure under sustained load or repeated cable tension.
Does a higher weight rating always mean a better mount?
Not for a bare Mini PC, since most only weigh 1 to 3 pounds and any mount here clears that easily. A higher rating matters only if you are adding a docking station, NAS enclosure, or piggybacking on a monitor's VESA point.
Will mounting my Mini PC make it run hotter?
Only if the mount traps its intake or exhaust against a solid surface or an enclosed space. Open-frame mounts with real clearance on multiple sides avoid this problem; a mount pressed into a tight under-desk cubby needs its own clearance check regardless of the bracket's design.
How is this guide different from the VESA mount and wall mount guides on this site?
This guide compares all three mounting methods side by side so you can decide which fits your desk first. Our VESA mount guide and wall mount guide each narrow into one specific method with more depth on that method's particular tradeoffs.
Bottom Line
Best overall: Adjustable Thin Client Mini PC Mount Bracket (Wall, Under Desk, Monitor Arm) — best overall pick pick in this roundup. See the full verdicts above for every pick, with pros, cons and who each one suits.
Browse all mini pc mounts on Amazon — Prime-eligible options with current pricing.